This is the lab page of the Advanced Network Architectures and Wireless Systems course held within the second year program of L.M. in Computer Engineering of the Dept. of Information Engineering of the University of Pisa by Prof. Enzo Mingozzi. The lab classes are held by Dr. Carlo Vallati. This page contains specific material for the lab classes. General material for the course can be found here.
11 December 2018
Slides for lab14 on OpenBaton are available. You can download the material cloning the repo lab14:
git clone https://github.com/lab-anaws/lab14-2018.git
You can also browse the code from https://github.com/lab-anaws/lab14-2018
The labs will be on Tuesday 11/12.
10 December 2018
Slides for lab13 on NFV are available. You can download the material cloning the repo lab13:
git clone https://github.com/lab-anaws/lab13-2018.git
You can also browse the code from https://github.com/lab-anaws/lab13-2018
The labs will be on Monday 10/12.
06 December 2018
A new set of VMs is available for the labs on NFV. You can download it from here
06 December 2018
Code and slides for lab12 on MPLS and Traffic Engineering are available. You can download the material cloning the repo lab12:
git clone https://github.com/lab-anaws/lab12-2018.git
You can also browse the code from https://github.com/lab-anaws/lab12-2018
The labs will be on Friday 07/12.
29 November 2018
Code and slides for lab9 on Floodlight REST interface are available. You can download the material cloning the repo lab9:
git clone https://github.com/lab-anaws/lab9-2018.git
You can also browse the code from https://github.com/lab-anaws/lab9-2018
The labs will be on Thursday 29/11.
29 November 2018
Code and slides for lab10 and 11 on QoS functionalities of the Internet backbone are available. You can download the material cloning the repo lab10-11:
git clone https://github.com/lab-anaws/lab10-11-2018.git
You can also browse the code from https://github.com/lab-anaws/lab10-11-2018
The first lab will be on Friday 30/11.
16 November 2018
Code and slides for lab7 and 8 on Floodlight programming by examples is available. You can download the material cloning the repo lab7-8:
git clone https://github.com/lab-anaws/lab7-8-2018.git
You can also browse the code from https://github.com/lab-anaws/lab7-8-2018
The labs will be on Friday 16/11 and Monday 19/11.
15 November 2018
Code and slides for lab6 on SDN introduction and Floodlight is available. You can download the material cloning the repo lab6:
git clone https://github.com/lab-anaws/lab6-2018.git
You can also browse the code from https://github.com/lab-anaws/lab6-2018
The first lab will be on Thursday 15/11.
08 November 2018
Code and slides for lab5 on GNS3 introduction and ios IPv6 configuration is available. You can download the material cloning the repo lab5:
git clone https://github.com/lab-anaws/lab5-2018.git
You can also browse the code from https://github.com/lab-anaws/lab5-2018
The first lab will be on Thursday 08/11.
06 November 2018
A new VM is available for the set of labs on the Internet backbone and SDN. You can download it from here
30 October 2018
Code and slides for lab4 on CoAP is available. You can download the material cloning the repo lab4:
git clone https://github.com/lab-anaws/lab4-2018.git
You can also browse the code from https://github.com/lab-anaws/lab4-2018
The first lab will be on Tuesday 30/10.
21 October 2018
Code and slides for lab3 on Border Router is available. You can download the material cloning the repo lab3:
git clone https://github.com/lab-anaws/lab3-2018.git
You can also browse the code from https://github.com/lab-anaws/lab3-2018
The first lab will be on Monday 22/10.
18 October 2018
Code and slides for lab2 on RPL is available. You can download the material cloning the repo lab2:
git clone https://github.com/lab-anaws/lab2-2018.git
You can also browse the code from https://github.com/lab-anaws/lab2-2018
The first lab will be on Friday 19/10.
15 October 2018
Code and slides for lab1 on IPv6 basic networking is available. You can download the material cloning the repo lab1:
git clone https://github.com/lab-anaws/lab1-2018.git
You can also browse the code from https://github.com/lab-anaws/lab1-2018
The first lab will be on Monday 15/10.
26 September 2018
Code and slides for lab0 is available. Lab0 is a preliminary lab on Contiki programming and IEEE 802.15.4 basic concepts. The lab is aimed at students who did not attend NES class and are not familiar with basic Contiki programming and the general architecture of the IEEE 802.15.4 protocol. You can download the material cloning the repo lab0:
git clone https://github.com/lab-anaws/lab0-2018.git
You can also browse the code from https://github.com/lab-anaws/lab0-2018
The first lab will be Friday 28/09. Students will need to download Instant Contiki virtual machine from here http://www.contiki-os.org/start.html. The VM can be executed on Windows or Linux using VMWare Player http://www.vmware.com/go/downloadplayer/. On MacOSX, VMWare Fusion can be used (unfortunately is not free) or VirtualBox https://www.virtualbox.org/
Make sure that the Instant Contiki VM version is 3.0!
Please download and execute the VM on your laptops before class!